TimeWidget2 Test Plan

Time Mode Constrained

New composition.
Reduce the composition to start at 10 and end at 20.
- Composition > Change Composition Start and End…
- Set the start to 10 and the end to 20.
Draw a 4 bar segment at bar 10.
Bring up matrix or notation, add a note at bar 11, beat 1.
Switch to select tool (F2), double-click on the note.
Click on the Edit button next to the Absolute Time field.
Confirm
- Measure 11, Beat 1, 0 64ths (4/4 time)
- Seconds 20, msec 0
- Ticks 38400
- No “Out Of Range” message.
- Limit button disabled.
- OK button enabled.

New composition.
Reduce the composition to start at 10 and end at 20.
- Composition > Change Composition Start and End…
- Set the start to 10 and the end to 20.
Draw a 4 bar segment at bar 10.
Bring up matrix or notation, add a quarter note (crotchet) at bar 11, beat 1.
Switch to select tool (F2), double-click on the note.
Click on the Edit button next to the Duration field.
Confirm
- Note quarter (crotchet), Ticks 960
- Measures 0, Beats 1, 0 64ths (4/4 time)
- Seconds 0, msec 500 (120.00 bpm)
- No “Out Of Range” message.
- Limit button disabled.
- OK button enabled.

Click on the Edit button next to the Duration field.
In the Note field, select half note (minim).
Confirm
- Ticks 1920
- Measures: 0/2/0/(4/4 time)
- Seconds: 1/0/(120.0 bpm)
- No “Out Of Range” message. Limit button disabled. OK button enabled.
Click OK
Confirm 1920 in the Duration field.
Click the Edit button next to the Duration field.
Increase Measures to 1 using the spin box.
Confirm
- Note: dotted whole note (semibreve), Ticks 5760
- Measures: 1/2/0
- Seconds: 3/0
- No “Out Of Range” message. Limit button disabled. OK button enabled.
Increase Beats to 3 with the spin box.
Confirm
- Note: <inexact>, Ticks 6720
- Measures: 1/3/0
- Seconds: 3/500
- No “Out Of Range” message. Limit button disabled. OK button enabled.
Reduce the seconds field to 2 and type 0 in the msec field.
Confirm
- Note: Whole Note (semibreve), Ticks: 3840
- Measures: 1/0/0
- Seconds: 2/0
- No “Out Of Range” message. Limit button disabled. OK button enabled.

New composition.
Change the tempo to 115.04.
- Composition > Add Tempo Change…
Change the time signature to 3/8.
- Composition > Add Time Signature Change…
Create a four bar segment at bar 1.
In matrix or notation, draw an eighth note (quaver) at bar 1 beat 3.
Switch to Select tool (F2), and double-click on the note.
Click on the Edit button next to the Absolute time field.
Confirm
- Measure: 1/3/0/(3/8 time)
- Seconds: 0/521
- Ticks: 960
Click Cancel
Click on the Edit button next to the Duration field.
Confirm
- Note: eighth (quaver), Ticks 480
- Measures 0/1/0/(3/8 time)
- Seconds 0/260/(115.04 qpm, 230.08 bpm)

New document
Add a time sig change at bar 2 to 2/2.
- Move the pointer to bar 2.
- Composition > Add Time Signature Change…
- 2/2
Add a tempo change to 100 at bar 1, beat 3.
- Move the pointer to bar 1 beat 3.
- Composition > Add Tempo Change…
- 100; Tempo is fixed; Apply this tempo from here onwards
Create a tempo change to 140 at bar 2, beat 2.
- Move the pointer to bar 2 beat 2.
- Composition > Add Tempo Change…
- 140; Tempo is fixed; Apply this tempo from here onwards
Create a two bar segment at bar 1.
Launch matrix or notation and drop a whole note (semi-breve) in measure 1 and another in measure 2.
Switch to the select tool (F2) and double-click the note in bar 1.
Click the Edit button next to duration.
Confirm “(starting 120.0 bpm)” in the lower right.
Double-click the note in bar 2.
Click the Edit button next to duration.
Confirm “(starting 100.0 qpm, 50.0 bpm)” in the lower right.